241/710CAME4

Spherical Roller Bearings

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Parts Number
241/710CAME4C5 Spherical Roller Bearings			Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Parts Number

241/710CAME4C5

Boundary Dimensions

d	710	mm	Bore diameter
D	1150	mm	Outside diameter
B	438	mm	Width
r (min.)	9.5	mm	Chamfer dimension

Basic Load Ratings

C_r	13900000	N	Basic dynamic load rating
C_0r	30500000	N	Basic static load rating

Speeds

Thermal Speed Rating (Oil-bath)	130	min^-1	Oil-bath lubrication subject to conditions outlined in ISO 15312
Grease	170	min^-1	Grease lubrication
Oil (Oil-bath)	220	min^-1	Oil-bath lubrication

Abutment and Fillet Dimensions

da (min.)	754	mm	Diameter of shaft abutment
Da (min.)	981	mm	Diameter of housing abutment
Da (max.)	1106	mm	Diameter of housing abutment
ra (max.)	8	mm	Radius of shaft or housing fillet

Calculation factors

e	0.38	Constant
Y2	2.6	Axial load Factors
Y3	1.8	Axial load Factors
Y0	1.7	Axial load Factors

Mass

(approx.)

1730

Drawing for Reference

Designations	Boundary Dimensions			Basic Load Ratings		Radial Internal Clearance			Tolerance Class	Speeds				Mass
	Boundary Dimensions			Basic Load Ratings		Radial Internal Clearance					Limiting Speeds			Mass
	d (mm)	D (mm)	B (mm)	C_r (N)	C_0r (N)		min	max		Thermal Speed Rating (Oil-bath) (min^-1)	Mechanical (forced-circulation oil) (min^-1)	Grease (min^-1)	Oil (Oil-bath) (min^-1)	(approx.) (kg)
241/710CAME4	710	1150	438	13900000	30500000				ISO NORMAL CLASS	130		170	220	1730

You can use this service by registering as a member.

Not to scale.
(*) The chamfer dimensions are minimum values.
Suffix K and K30 represents bearings with tapered bores (taper 1:12 or 1:30).

CAD

FAQs (3)

Customer Questions

How do I lubricate spherical roller bearings? Are oil grooves and oil holes provided?

Yes, oil grooves and oil holes come standard in the outer ring of NSK spherical roller bearings for easy lubrication. These are indicated by “E4” in the designation.

How is using two tapered roller bearings different from using a spherical roller bearing?

Assuming that a face-to-face combination (DF arrangement) with the same roller arrangement is used, the biggest differences are the amount of permissible misalignment and the spherical roller bearing's capacity for self-alignment.

What grease is recommended for spherical roller bearings?

We generally recommend Shell Alvania S2 grease (AS2) for spherical roller bearings.

More Information

More Information
NSK Product Type2	SRB_CTB
NSK Product Type	Bearing
Designations	241/710CAME4