51115

Single-Direction Thrust Ball Bearings

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Parts Number
51115 Single-Direction Thrust Ball Bearings			Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Parts Number

51115

Boundary Dimensions

d	75	mm	Bore diameter
D	100	mm	Outside diameter
T,T3	19	mm	Height
r (min.)	1	mm	Chamfer dimension

Basic Load Ratings

C_a	43500	N	Basic dynamic load rating
C_0a	131000	N	Basic static load rating

Speeds

Grease	2200	min^-1	Grease lubrication
Oil (Oil-bath)	3400	min^-1	Oil-bath lubrication

Dimensions

d1	100	mm	Outside diameter shaft washer
D1	77	mm	Inner diameter housing washer

Abutment and Fillet Dimensions

da (min.)	90	mm	Diameter of shaft abutment
Da (max.)	85	mm	Diameter of housing abutment
ra (max.)	1	mm	Radius of shaft or housing fillet

Mass

(approx.)

0.389

Drawing for Reference

Designations	Boundary Dimensions				Basic Load Ratings		Tolerance Class	Limiting Speeds		Mass
Designations	d (mm)	D (mm)	T,T3 (mm)	T4 (mm)	C_a (N)	C_0a (N)	Tolerance Class	Grease (min^-1)	Oil (Oil-bath) (min^-1)	(approx.) (kg)
51115	75	100	19		43500	131000	ISO NORMAL CLASS	2200	3400	0.389

You can use this service by registering as a member.

Not to scale.
(*) The chamfer dimensions are minimum values.
For heavy load applications, ensure that the da value chosen is large enough to support the shaft washer rib.

CAD

FAQs (2)

Customer Questions

How are axial load and thrust load different?

Axial load and thrust load are different words for the same concept: They both refer to loads parallel to the axis of the shaft.

Can thrust ball bearings take radial loads?

No, thrust ball bearings cannot take radial loads.

51115

Parts Number

Boundary Dimensions

Basic Load Ratings

Speeds

Dimensions

Abutment and Fillet Dimensions

Mass

Select a distributor

Your company is not activated