6080 Series

Single-Row Deep Groove Ball Bearings

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Radial Internal Clearance

Tolerance

Grouped product items
Parts Number
6080MC3 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080M Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC2 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC2P5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC2P6 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC3P5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC3P6 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC4 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC4P5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC4P6 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC5P5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MC5P6 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MP5 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.
6080MP6 Single-Row Deep Groove Ball Bearings			Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Designations

6080

Boundary Dimensions

d	400	mm	Bore diameter
D	600	mm	Outside diameter
B	90	mm	Width
r (min.)	5	mm	Chamfer dimension

Basic Load Ratings

C_r	560000	N	Basic dynamic load rating
C_0r	825000	N	Basic static load rating

Speeds

Grease	850	min^-1	Grease lubrication
Oil (Oil-bath)	1000	min^-1	Oil-bath lubrication

Abutment and Fillet Dimensions

da (min.)	420	mm	Diameter of shaft abutment
Da (max.)	580	mm	Diameter of housing abutment
ra (max.)	4	mm	Radius of shaft or housing fillet

Calculation factors

15.7

Factor

Additional information

z	13		Number of Balls
Dw	63.5	mm	Ball Diameter

Mass

(approx.)

88.4

Drawing for Reference

Designations	Basic Load Ratings		Radial Internal Clearance			Tolerance Class	Limiting Speeds		Number of Balls	Ball Diameter		Mass
Designations	C_r (N)	C_0r (N)		min	max	Tolerance Class	Grease (min^-1)	Oil (Oil-bath) (min^-1)	Number of Balls	(mm)	(inch)	(approx.) (kg)
6080	560000	825000					850	1000	13	63.5	2.5	88.4

You can use this service by registering as a member.

Not to scale.
(*) The chamfer dimensions are minimum values.
6000N, 6000NR, 6001N, 6001NR : Snap ring groove dimensions and snap ring dimensions are not based on ISO 15.

CAD

FAQs (3)

Customer Questions

What are radial loads and axial loads?

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

How do deep groove ball bearings (DGBBs) differ from single-row angular contact ball bearings?

While DGBBs can handle axial loads in both directions, single-row angular contact ball bearings can only receive axial load in one direction.

What are the differences between open, sealed, and shielded deep groove ball bearings?

Seals and shields offer additional protection for bearing components and help to improve and maintain lubrication. In terms of sealing performance, sealed bearings rank best, followed by shielded bearings, then finally open bearings.
NSK uses supplementary designations D, DU, DW, and V (DD, DDU, DDW, VV) for sealed bearings and Z (ZZ) for shielded bearings. No supplementary designations are listed for open bearings.

More Information

More Information
NSK Product Type2	DGBB_SR
NSK Product Type	Bearing
Designations	6080