FR2-6ZZSMC5

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flange

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Parts Number		Qty
FR2-6ZZSMC5 Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flange		Qty	Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Parts Number

FR2-6ZZSMC5

Boundary Dimensions

d	3.175	mm	Bore diameter
D	9.525	mm	Outside diameter
B	3.571	mm	Width
D1,2	10.719	mm	Flange diameter
C1,2	0.787	mm	Flange width
r (min.)	0.15	mm	Chamfer dimension

Basic Load Ratings

C_r	705	N	Basic dynamic load rating
C_0r	225	N	Basic static load rating

Speeds

Grease

53000

min^-1

Grease lubrication

Abutment and Fillet Dimensions

db (max.)	4.6	mm	Diameter of shaft abutment
ra (max.)	0.15	mm	Radius of shaft or housing fillet

Additional information

z	7		Number of Balls
Dw	1.588	mm	Ball Diameter

Mass

(approx.)

0.00125

Properties

Cage	( ): Pressed steel cage
Seals,Shields	ZZ: Shield on both sides
Radial Internal Clearance	MC5
Sound	E: Quieter than standard
Tolerance	ANSI/ABEC 1

Drawing for Reference

Designations	Basic Load Ratings		Radial Internal Clearance			Tolerance Class	Limiting Speeds		Number of Balls	Ball Diameter		Mass
Designations	C_r (N)	C_0r (N)		min	max	Tolerance Class	Grease (min^-1)	Oil (Oil-bath) (min^-1)	Number of Balls	(mm)	(inch)	(approx.) (kg)
FR2-6ZZS	705	225				ANSI/ABEC 1	53000		7	1.588	0.06252	0.00125

You can use this service by registering as a member.

Not to scale.
(*) The chamfer dimensions are minimum values.

CAD

FAQs (3)

Customer Questions

What are radial loads and axial loads?

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

How do deep groove ball bearings (DGBBs) differ from single-row angular contact ball bearings?

While DGBBs can handle axial loads in both directions, single-row angular contact ball bearings can only receive axial load in one direction.

What are the differences between open, sealed, and shielded deep groove ball bearings?

Seals and shields offer additional protection for bearing components and help to improve and maintain lubrication. In terms of sealing performance, sealed bearings rank best, followed by shielded bearings, then finally open bearings.
NSK uses supplementary designations D, DU, DW, and V (DD, DDU, DDW, VV) for sealed bearings and Z (ZZ) for shielded bearings. No supplementary designations are listed for open bearings.

More Information

More Information
NSK Product Type2	ESM_ID_WF
NSK Product Type	Bearing
Designations	FR2-6ZZS

FR2-6ZZSMC5

Parts Number

Boundary Dimensions

Basic Load Ratings

Speeds

Abutment and Fillet Dimensions

Additional information

Mass

Properties

Select a distributor

Your company is not activated