FR4B Series

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flange

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Radial Internal Clearance

Tolerance

Grouped product items
Parts Number
FR4BMC3 Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flange			Add to Compare You can use this service by registering as a member.
FR4BMC5 Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flange			Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Designations

FR4B

Boundary Dimensions

d	6.35	mm	Bore diameter
D	15.875	mm	Outside diameter
B	4.978	mm	Width
D1,2	17.526	mm	Flange diameter
C1,2	1.067	mm	Flange width
r (min.)	0.3	mm	Chamfer dimension

Basic Load Ratings

C_r	1770	N	Basic dynamic load rating
C_0r	615	N	Basic static load rating

Speeds

Grease	38000	min^-1	Grease lubrication
Oil (Oil-bath)	45000	min^-1	Oil-bath lubrication

Abutment and Fillet Dimensions

da (min.)	8.4	mm	Diameter of shaft abutment
ra (max.)	0.3	mm	Radius of shaft or housing fillet

Additional information

z	8		Number of Balls
Dw	2.5	mm	Ball Diameter

Mass

(approx.)

0.00482

Drawing for Reference

Designations	Basic Load Ratings		Radial Internal Clearance			Tolerance Class	Limiting Speeds		Number of Balls	Ball Diameter		Mass
Designations	C_r (N)	C_0r (N)		min	max	Tolerance Class	Grease (min^-1)	Oil (Oil-bath) (min^-1)	Number of Balls	(mm)	(inch)	(approx.) (kg)
FR4B	1770	615					38000	45000	8	2.5	0.098425	0.00482

You can use this service by registering as a member.

Not to scale.
(*) The chamfer dimensions are minimum values.

CAD

FAQs (3)

Customer Questions

What are radial loads and axial loads?

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

How do deep groove ball bearings (DGBBs) differ from single-row angular contact ball bearings?

While DGBBs can handle axial loads in both directions, single-row angular contact ball bearings can only receive axial load in one direction.

What are the differences between open, sealed, and shielded deep groove ball bearings?

Seals and shields offer additional protection for bearing components and help to improve and maintain lubrication. In terms of sealing performance, sealed bearings rank best, followed by shielded bearings, then finally open bearings.
NSK uses supplementary designations D, DU, DW, and V (DD, DDU, DDW, VV) for sealed bearings and Z (ZZ) for shielded bearings. No supplementary designations are listed for open bearings.

More Information

More Information
NSK Product Type2	ESM_ID_WF
NSK Product Type	Bearing
Designations	FR4B