FR4B

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flamge

FR4B

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flamge

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Parts Number
FR4BMC3

Product Information

Display units Metric Imperial

Parts Number

FR4BMC3

Boundary Dimensions

d	6.35	mm	Bore diameter
D	15.875	mm	Outside diameter
B	4.978	mm	Width
D1,2	17.526	mm	Flange diameter
C1,2	1.067	mm	Flange width
r (min.)	0.3	mm	Chamfer dimension

Basic Load Ratings

Cr	1770	N	Basic dynamic load rating
C0r	615	N	Basic static load rating

Speeds

Grease	38000	min-1	Grease lubrication
Oil (Oil-bath)	45000	min-1	Oil-bath lubrication

Abutment and Fillet Dimensions

da (min.)	8.4	mm	Diameter of shaft abutment
ra (max.)	0.3	mm	Radius of shaft or housing fillet

Additional information

z	8		Number of Balls
Dw	2.5	mm	Ball Diameter

Mass

Mass approx.

0.00482

Mass approx.

CAD

FAQs (3)

Customer Questions

What are radial loads and axial loads?

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

How do deep groove ball bearings (DGBBs) differ from single-row angular contact ball bearings?

While DGBBs can handle axial loads in both directions, single-row angular contact ball bearings can only receive axial load in one direction.

What are the differences between open, sealed, and shielded deep groove ball bearings?

Seals and shields offer additional protection for bearing components and help to improve and maintain lubrication. In terms of sealing performance, sealed bearings rank best, followed by shielded bearings, then finally open bearings.
NSK uses supplementary designations D, DU, DW, and V (DD, DDU, DDW, VV) for sealed bearings and Z (ZZ) for shielded bearings. No supplementary designations are listed for open bearings.

Drawing for Reference

Designations	Basic Load Ratings		Radial Internal Clearance			Tolerance Class	Limiting Speeds		Number of Balls	Ball Diameter		Mass
Designations	Cr (N)	C0r (N)		min	max	Tolerance Class	Grease (min-1)	Oil (Oil-bath) (min-1)	Number of Balls	(mm)	(inch)	(kg)
FR4B	1770	615				ANSI/ABEC 1	38000	45000	8	2.5	0.098425	0.00482

Not to scale.
(*) The chamfer dimensions are minimum values.

More Information

More Information
NSK Product Type2	ESM_ID_WF
NSK Product Type	Bearing

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flamge

Extra Small Ball Bearings and Miniature Ball Bearings Inch Series With Flamge

Parts Number

Boundary Dimensions

Basic Load Ratings

Speeds

Abutment and Fillet Dimensions

Additional information

Mass

Select a distributor

Your company is not activated