EN13

Magneto Bearings

Skip to the beginning of the images gallery

Images shown are representations. Designs and specifications may differ from actual products.

Parts Number
EN13 Magneto Bearings			Add to Compare You can use this service by registering as a member.

Product Information

Display units Metric Imperial

Parts Number

EN13

Boundary Dimensions

d	13	mm	Bore diameter
D	30	mm	Outside diameter
B,C,T	7	mm	Width
r (min.)	0.3	mm	Chamfer dimension
r1 (min.)	0.15	mm	Chamfer dimension

Basic Load Ratings

C_r	4850	N	Basic dynamic load rating
C_0r	845	N	Basic static load rating

Speeds

Grease	22000	min^-1	Grease lubrication
Oil (Oil-bath)	26000	min^-1	Oil-bath lubrication

Abutment and Fillet Dimensions

da (min.)	15	mm	Diameter of shaft abutment
Da (max.)	28	mm	Diameter of housing abutment
ra (max.)	0.3	mm	Radius of shaft or housing fillet

Mass

(approx.)

0.021

CAD

FAQs (3)

Customer Questions

What are radial loads and axial loads?

Loads are defined by their direction. Loads perpendicular to the shaft are called radial loads and loads parallel to the shaft are called axial (thrust) loads.

How do deep groove ball bearings (DGBBs) differ from single-row angular contact ball bearings?

While DGBBs can handle axial loads in both directions, single-row angular contact ball bearings can only receive axial load in one direction.

What are the differences between open, sealed, and shielded deep groove ball bearings?

Seals and shields offer additional protection for bearing components and help to improve and maintain lubrication. In terms of sealing performance, sealed bearings rank best, followed by shielded bearings, then finally open bearings.
NSK uses supplementary designations D, DU, DW, and V (DD, DDU, DDW, VV) for sealed bearings and Z (ZZ) for shielded bearings. No supplementary designations are listed for open bearings.

More Information

More Information
NSK Product Type2	DGBB_DGBB_MB
NSK Product Type	Bearing
Designations	EN13

EN13

Parts Number

Boundary Dimensions

Basic Load Ratings

Speeds

Abutment and Fillet Dimensions

Mass

Select a distributor

Your company is not activated